Full-Set ready to work
Irizar SAW Welding Tractor: It is a self-propelled SAW tractor. Apply SAW butt or fillet welds on the tank floor; or circumferential fillet SAW on Annular-Plate to Bottom Tank-Shell.
Include:
- Input Power: 110V, 50/60 Hz, 1P
- Set Up Configuration: Basically, two configurations depending on the Lincoln Power Source
- Using Lincoln DC 600 or DC 1000 (sold separately). Include: Lincoln SAW Control Box and Irizar Welding Head
- Using Lincoln FlexTec 650X Power Source (sold separately). Include: Lincoln NA3S Welding Controller, and Lincoln NA-3SF Welding Head
- Tractor variable speed: From 0.20 to 2.20 m/minute
- Controls: ON/OFF, FWD/REV, & speed potentiometer
- Cross slide: 100 mm (up/down) x 100 mm (left/right)
- Vertical head lifting adjustment: 70 mm
- Head rotation: ±90°
- Head inclination: ±45°
- Wire Reel: For coils 50 or 60 lbs. ID: 12 in. x 5 in. width
- Guide Rail: 1 m/each x 3 units
- Control Cable w 14 Pins, male/female with quick connectors: 30 m
- Contact Tips (one of each): 2.40 mm (3/32″), 3.20 mm (1/8″) and 4.0 mm (5/32″)
Required & Not-included: Welding cable 120 mm², 30 m
Optional
1) Power Source dc 1000 or Flextec 650X
2) Electrical Flux Recovery System
- Input Power: 110V, 50/60 Hz, 1p
- Included: Recovery hose x 1 pc (1 m), Flux pick-up nozzle x 1 pc, Nozzle bracket x 1 pc and Filter bag x 1 pc
- Flux Hopper: 4 Liters
- Dimensions: 260 mm x 220 mm x 550 mm
- Net Weight: 6.2 kg
3) Irizar Magnetic Device
Uphold vertical SAW Welding Tractor while one wheel is floating, and it runs fastened by magnets to the Tank-Shell, either inside or outside the tank.
- Minimum OD Tank: 9 m
- Outside annular-plate: Min 50.8 mm (2'')
- Device can rollover a vertical tank welding seams with a max. crown of 3 mm (1/8'')
- Packing (m): 0.60 (L) x 0.40 (W) x 0.28 (H) @ 17 kg