Oscillator Welding Tractor Model V/C
Apply MIG/FCAW vertical welding seams. It can also apply circumferential welding seams on pipes with OD ≥ 1,000 mm. For vertical seams, it is recommneded to use Motorized Basket since no need of scaffolding. 3D Basket
Basket is designed to fit inside a vertical up Irizar Oscillator Welding Tractor Model 3000. Also, our basket is compatible with tractors made by Gullco Kat, Bug-O, and ESSAB, among others.
- On/Off Switch
- Quick Clamping Torche Holder for welding gun
- Forward/Reverse Travel Switch
- Interface Welding Machine Switch
- Variable Speed Knob: From 50 to 500 mm/minutes
- Torch Adjustment: Up/Down: 50 mm, Left/Right: 200 mm, Angle: ±45 degrees.
- Oscillation Left/Right Stay Time: 0-2.5 seconds
- Oscillation Speed: 0-99 seconds
- Oscillation Angle: ±10 degrees
- Oscillation Pattern Selection Knob: Five types
- Power Supply: AC 120 V, 50/60 HZ, single phase
- Flexible Rail Track: Two of 1.6 m each; plus twelve magnets
- Magnets: Twelve
- Packing dimensions (mm):
- Tractor: 580 (L) x 250 (W) x 345 (H) @ 9 kg
- Tracks: 1,600 (L) x 50 (W) x 50 (H) @ 8 kg
- Magnets: 500 (L) x 200 (W) x 200 (H) @ 25 kg
Oscillator Welding Tractor Mode C
Apply MIG/FCAW circumferential welding seams on pipes with OD from 500 to 900 mm.
Full-Set ready to work
- Oscillator Tractor (Select from above Model V/C or C)
- Lincoln Wire Feeder
- Lincoln FlexTeck 650X Power Source
- Lincoln Welding Gun, 15' cable
- Drive wire rolls: 035/045 Solid, 035C, 045C, 052C & 1/16'' C
- Welding cable & Control cables: 30 m each.
- Not inlcuded: wire, flux and contact tips